******************************************
ECP2000 Read Me
******************************************

******************************************
CHANGELOG
******************************************

12.07.2019 (v3.6.0.0)
- fixed bug ISS-91471 (parameters aren't not disabled when they are not supported by FW)
- updated pump errors/warnings according to new firmware
- added valve mapping (hw config, method-lc2, print report, monitor)
- fixed purge status when resume from purge

15.03.2019 (v3.5.0.0)
- fixed monitor for start compensation learning (learned temporary mode)
- fixed units in Device Info
- fixed numeric editbox check for delete
- fixed Detector Setup dialog for Demo (User's text)
- improved unit conversions
- improved fp comparison
- change default pump pressure according to Clarity pressure units
- moved the most of texts into resource!

18.09.2018 (v3.4.0.0)
- fixed Calibration info units (PrSensorOffset, PrSensorRatio)
- enhanced Parts info (added diagnostics for right check valves - preparative pump)
- enhanced Boards info (added board names)
- added Valve mapping info (only from FW >= 5.64)
- added Safe start when pump stops when no communication (only for FW >= 5.65 or FW 5.15-5.59; option KeepLCRunningOnInstrumentClose disables the feature)
- enhanced Autodetect (search for both XPort and ERVIN5)

10.09.2018 (v3.3.0.0)
- fixed Clarity 8 method sending (SetNoComp)
- moved to SDK v1.2.0.56 (updated UI, new lamp icons)
- renamed RW dialog title from "Ecom ECP2000 Setup" to "Pump Setup"
- modified Outputs (changed logic - opened=0, closed=1)
- fixed ROConfig dialog (storing ROLimits)

10.10.2017 (v3.2.0.0)
- fixed method logging (digital output string array, added display brightness and pressure units, improved beeper)
- fixed method print (added display pressure unit)

12.09.2017 (v3.1.0.0)
- fixed language translation (add LoadLanguageDllsAndAddToMfcChain)

30.08.2017 (v3.0.0.0)
- fixed demo mode (buttons AutoDetect, Test and Set User's Specification; default firmware)

21.08.2017 (v2.9.0.0)
- added new option (Leakage) for dig. output config (FW>=5.00)
- added new parameter bAutoGrValveClosing (FW>=4.74)
- added some errors/warnings
- renamed compensation options (need manual modification)
- modified compensation default value to Off

15.05.2017 (v2.8.0.0)
- added new option (Program start) for dig. input config

22.03.2017 (v2.7.0.0)
- fixed richedit text limit in Info/Log dialog

15.12.2016 (v2.6.0.0)
- enabled button LC Status in Measurement Condition

17.09.2016 (v2.5.0.0)
- fixed Combobox controls (drop list)
- fixed default ROConfig for demo mode

07.07.2016 (v2.4.0.0)
- modified error severity (>=WRNERR_BlockingErrorLimit means stop)

16.05.2016 (v2.3.0.0)
- fixed program status (bProgram is initiated from v3.67)

14.04.2016 (v2.2.0.0)
- enhanced ECP2000 (added error 8 and warnings 24, 25, 26)
- added program status and sleeping valves

03.09.2015 (v2.1.0.0)
- enhanced ECP2000 (added error 48)
- added reading of ETHINFO, BOARDSINFO, CALIBINFO
- enhanced Info/Log dialogs (added Parameters, support v3.04, save RTF to file)

27.07.2015 (v2.0.0.0)
- moved to VS2010 (signed/unsigned fixes, pretyping, _CRT_SECURE_NO_WARNINGS, project, atlctl.h, include dir $(ProjectDir))
- fixed strCommunication (CTCPPipe2::GetDescription)
- fixed rounding of concentration
- fixed NumEdit (decimal point by current localization)

05.05.2015 (v1.3.0.0)
- fixed title Detector Info -> Device Info (IDD_INFO_DLG)
- added OEM KONIK (USE_OEM_KONIK, CXProtocol::CmdReadID(), CXRWConfigDlg::OnInitDialog(), CSearchListDlg::OnInitDialog(),
  OnPMPreparePrinting() - dname, c_str_TITLERESULT, xAbout, xDocumentation)
- fixed errors/warnings

28.05.2014 (v1.2.0.0)
- added searching support for newer ETH module (X9)

02.04.2014 (v1.1.0.0)
- added own numeric editbox validation (red box)
- added solvents limit functionality (General Settings property, monitor Set Solvent Volumes button, print, ...)
- added I/O functionality (I/O Settings property, ...)
- enhanced ROConfig dialog
- enhanced learning comp. functionality
- added Info dialog (monitor)
- fixed error descriptions for newer FW
- changed default high pressure limit to 40 MPa
- changed other default parameters
- added pump name (RW config, monitor, print)
- added user text configuration (RWConfig)
- moved to SDK v1.0.10.138 (+fixed sDigInOutButton.inl)

12.12.2013 (v1.0.3.0)
- modified errors for new FW

09.09.2013 (v1.0.2.0)
- fixed OK button on RW dialog

28.08.2013 (v1.0.1.0)
- official release

14.08.2013 (v1.0.0.5)
- fixed leakage use for actual firmware
- added learning compensation status (asterisk, start/stop)

09.08.2013 (v1.0.0.4)
- fixed for actual pump firmware (leakage use, compensation, ...)
- fixed error/warning order on message dialog
- fixed error/warning in demo mode

10.07.2013 (v1.0.0.3)
- modified function CmdConfirmErrors() (new command BIGPROT_CMD_STOPSOUND)
- modified monitor title (GetCustonName(CNT_Monitor), e.g. ECP2010 (SN 700002))
- reorganized monitor

26.06.2013 (v1.0.0.2)
- modification of monitor status (show only status)

21.06.2013 (v1.0.0.1)
- modification for error severity

19.06.2013 (v1.0.0.0)
- 1st release


